Features Summary of GA-945P-S3

http://hardsoftwareinfo.blogspot.com

CPU:	Supports LGA 775 Intel Core 2 Extreme/Core 2 Duo/Pentium D/Pentium 4 L2 cache varies with CPU
Front Side Bus:	Supports 1066/800/533MHz FSB
Chipset:	Northbridge: Intel 945P Express Chipset Southbridge: Intel ICH7
LAN:	Onboard RTL8111B Chip (10/100/1000 Mbit)
Audio:	Onboard Realtek ALC883 chip Supports High Definition Audio Supports 2/4/6/8 (note 1) channel audio Supports SPDIF In/Out connection Supports CD In connection
Storage:	ICH7 Southbridge 1 FDD connector, allowing connection of 1 FDD device 1 IDE connector with UDMA 33/ATA 66/ATA 100 support, allowing connection of 2 IDE devices 4 SATA 3Gb/s connectors, allowing connection of 4 SATA 3Gb/s devices
O.S. Support:	Microsoft Windows 2000/XP
Memory:	4 DDRII memory slots (supports up to 4GB memory) (note 2) Supports dual channel DDRII 667 (note 3) /533/400 unbuffered DIMMs Supports 1.8V DDRII DIMMs
Expansions Slots:	1 PCI Express x16 slot 3 PCI Express x1 slot 3 PCI slots
Internal Connector:	1 24-pin ATX power connector 1 4-pin ATX 12V power connector 1 floppy connector 1 IDE connector 4 SATA 3Gb/s connectors 1 CPU fan connector 1 system fan connector 1 front panel connector 1 front audio connector 1 HDA_SUR connector 1 CD In connector 2 USB 2.0/1.1 connectors for additional 4 ports by cables 1 SPDIF In/Out connector 1 power LED connector
Rear Panel I/O:	1 PS/2 keyboard port 1 PS/2 mouse port 1 serial port (COMA) 1 parallel port 4 USB 2.0/1.1 ports 1 RJ-45 port 3 audio jacks (Line In/Line Out/MIC In)
I/O Control:	IT8718 chip
Hardware Monitor:	System voltage detection CPU temperature detection CPU/System fan speed detection CPU warning temperature CPU/System fan failure warning CPU smart fan control
BIOS:	1.4 Mbit flash ROM Use of licensed AWARD BIOS
Additional Features:	Supports @BIOS Support Download Center Support Q-Flash Supports EasyTune (note 4) Supports Xpress Install Support Xpress Recovery2 Supports Xpress BIOS Rescue
Bundle Software:	Norton Internet Security (OEM revision)
Form Factor:	ATX form factor; 30.5 cm x 19.3 cm

Note:

1. To set up an 8 channel audio configuration, you must use 5.1/7/1 Surround Cable (optional).

2. Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual

memory size is less than the stated amount. For example, 4 Gb of memory size will instead be shown as 3.xx Gb memory

during system startup.

3. To use a DDR II 667 memory module on the motherboard, you must install an 800/1066 MHz FSB processor.

4. EasyTune function may vary depending on different motherboards.

Source: GA-945P-S3 User's Manual

Motherboard Image:

GA-8VM533P

GA-945GCM-S2L

GA-8VM533

GA-8S661GXMP-C

GA-8IE2004P

GA-945P-DS3_Rev20

GA-945GZM-S2_Rev21

GA-945PL-DS3_Rev20

Read more »

Learn How to Install Joomla on Your Website in 2 Minutes Or Less oleh Muhammad Jalloh

Article Source: http://EzineArticles.com/?expert=Muhammad_Jalloh



You can learn how to install Joomla on your website in a number of ways. However, the simplest and by far, the quickest is through Fantastico. This usually takes about 1-2 minutes once you know how. In this article, we are going to cover just that.

So, here is the step by step process for installing Joomla on your own website.

1. Log in to your hosting account's Control Panel. This should usually be http://www.mydomainname.com/controlpanel, where 'mydomainnane' is replaced your own website that is hosted on that hosting account.
2. Look for the smiley icon that says "Fantastico" and click on it. This is where you will be installing the Joomla package from. Note that Sometimes, it may say "Fantastico De Luxe." Don't worry it is the same thing. Much like saying "my room" and "my bedroom" ;)
3. Look for "Joomla" under the "Content Management" category of scripts in Fantastico and click on it. Also, note that the title 'Joomla' may sometimes have some numerical suffixes showing which version it is. For example, the title may read "Joomla 1.5" for version 1.5 of the CMS. Just click on the most recent version and go to the next step.
4. Look for the hyperlinked blue "New Installation" link and make sure you have at least as much as the minimum disk space required for you to install Joomla on your website. This is usually about 25 MB of disk space. This is not usually a problem, with most people's disk space running into the tens of gigabytes. But it is still good to make sure you have enough to hold a new Joomla installation.
5. Choose where on your website you want to install Joomla. Will it be on your main domain, an existing sub-domain or a new not-yet-existing sub-domain or directory? Indicate it in this part of the installation process.
6. Fill out other required fields that are required to smoothly install Joomla on the site. This includes creating an Admin username and password. Don't choose 'Admin' and 'password' as your username and password. Many people do this and have been hacked. Also, fill out the site name or main keyword, email address and other details here. Then click the "Install Joomla" button.
7. On the next page, make sure that all the needed information is correct. Also, note down your Admin username, password and backend page (the one that ends with /administrator). Finally, hit that "Finish Installation" of a button.

Voila! You have just learned how to install Joomla on your website. This should usually take only 1 or 2 minutes at most. After all, all you are doing is just hitting buttons, except for when choosing a username, etc.

If it still sounds a little like "nerd talk" (with all due respect to all the nerds out there ;) ), you can watch the video version of this article where you see the installation done live on the screen and see if you can learn how to install Joomla after that.

Muhammad Jalloh is the creator of dozens of Joomla Video Tutorials to help you learn how to create, design and manage your own Joomla website quickly and easily. You can read or view other tutorials on http://www.JoomlaSultan.com

Read more »

The High Cost of Inkjet Printer Cartridges

Article Source: http://EzineArticles.com/?expert=Peter_Stroud


Inkjet printers offer a print technology that offers professional printing for the home and small business user at a minimal cost, often for the cost of one or two hundred dollars. Unfortunately the exorbitant cost of the replacement ink cartridges soon brings the dreamers of d.i.y. high quality printing (which lends itself to the concept of savings) back to earth.

A set of ink cartridges often cost more than a new printer.

In fact at one stage in the evolution of inkjet printers, it was cheaper to buy a new Canon BJC210 printer which contained both a black and color cartridge, than it was to buy a new black, and a new color cartridge for the same printer from a retailer! It is obvious from this example to work out where the profit for the printer / cartridge manufacturer was.

With the high cost of replacement inkjet cartridges there are many developments in the market for reducing the cost of printing with desktop inkjet printers.

Options included:

* compatible inkjet cartridges
* refilling inkjet cartridges
* continuous inkjet delivery systems

Each of these alternatives offers ways to reduce the high cost of manufacturers inkjet cartridges while still producing quality inkjet prints.

Savings varied with the method employed and the type of cartridge involved.

Savings from as little as 10-20% are offered by some compatible cartridges. Other "simple" cartridges which contain very little technology often offer savings around 60%.

Refilling inkjet cartridges often saves of around 50% where the end user employs the services of a professional refiller, while refilling a cartridge as end user gives greater savings (and sometimes greater frustration).

The greatest saving can be achieved with many inkjet printers is by using one of the alternative continuous ink supply systems. Due to the investment of the ink supply system, a reasonable volume of printing is required to return the greater savings.

Continuous ink supply systems can offer savings of over 90%.

Peter Stroud has had a hands on role with the cartridge remanufacturing industry over a period of 10 years. The website continuous inkjet ink system references many of the ink systems and associated suppliers of continuous ink system components.

Epson printers have traditionally been a favourite of continuous ink system suppliers epson stylus photo 1400.

Read more »

Computer Hardware Conflicts

Article Source: http://EzineArticles.com/?expert=Chris_Paxton

Our computers have many different parts inside them that all need to work together. It is imperative that they run concurrently with no problems. When we take apart a computer we are left with many individual components. These components we find are graphics cards, RAM, processor, cooling fans, power units, hard drives, CD drives, wireless cards, special media card readers, sound cards, battery packs, that are all connected to the mother board. If one of these parts doesn't like the other it can cause major errors for your computer and how your computer may run. It could even result in your computer running slower than normal.

For example, in one of our company's computer that was built by us we had a graphics card that did not like the mother board connection for some reason. Unfortunately we did not know this at the time and it took us about two weeks to figure it out. This caused the graphics to constantly have a delay. Sometimes the delay was tolerable but other times the delay was so bad that you would move the mouse and the pointer would start to move on the screen 5 seconds after we moved the mouse. We would shut down the computer properly and restart and most of the time it ran perfect again like it had no problem at all but later on it started to act up again. We updated all the drivers, talked to the people that make the graphics card, changed out the monitor thinking it was that. After working out all the bugs that naturally come with a self-built computer we found a guy that worked for the company that produced the mother board that we were using and even though they claimed that our graphics card was compatible he admitted obviously it wasn't. He swapped out our graphics card for free and our computer has never been stronger.

If you build your own computer you are taking on the risk of having hardware conflicts. The good part of this story is that in today's world many of the companies that make these components are doing their best to make sure everything is universal. People are working day in and day out to make sure the hardware/components of your computer are programmable so that they can make everything compatible with just a simple software adjustment or driver upgrade. If you have a conflict among your hardware you can still get the maximum performance out of the components you have picked. A simple driver update can do the trick and keep you away from having a slow computer or the frustrating process of trying to find out what the problem is.

Help Slow Computer can help with any questions that you may have or would like to bring up. Speeding Up Your Computer is something that you can do on your own and we can help.

ZahidOffset's http://keluargarahmadi.blogspot.com

PulsaGram http://www.pulsagram.com/?id=wj9559

Read more »

Installation of the CPU and CPU Cooler

http://hardsoftwareinfo.blogspot.com


CAUTION:
Before installing the CPU, please comply with the following conditions:
1. Please make sure that the motherboard supports the CPU

2. Please take note of the one indented corner of the CPU. If you install the CPU in the wrong direction, the CPU will not insert properly. If occurs, please change the insert direction of the CPU.

3. Please add an even layer of heat paste between the CPU and CPU cooler.

4. Please make sure the CPU cooler is installed on the CPU prior to system use, otherwise overheating and permanent damage of the CPU may occur.

5. Please set the CPU host frequency in accordance with the CPU specifications. It is not recommended that the system bus frequency be set beyond hardware specifications since it does not meet the required standards of the peripherals. If you wish to set the frequency beyond the proper specifications, please do so according to your hardware specifications including the CPU, graphics card, memory, hard drive, etc.


Note: HT functionality requirement content:
Enabling the functionality of Hyper-Threading Technology for your computer system requires all of the following platform components:
- CPU: An Intel Pentium 4 CPU with HT Technology
- Chipset: An Intel Chipset that supports HT Technology
- BIOS: A BIOS that supports HT Technology and has it enabled
- OS: An operation system that has optimizations that has optimizations for HT technology


A. Installation of the CPU
Step 1, Gently lift the metal lever located on the CPU socket to the upright position.

Step 2, Remove the plastic covering on the CPU socket.

Step 3, Notice the small gold colored triangle located on the edge of the CPU socket. Align the indented corner of the CPU with the triangle and gently insert the CPU into position. (Grasping the CPU firmly between your thumb and forefinger, carefully place it into the socket in a straight and downwards motion. Avoid twisting or bending motions that might cause damage to the CPU during installation)

Step 4, Once the CPU is properly inserted, please replace the load plate and push the metal lever back into its original position.


B. Installation of the CPU Cooler
Step 1, Please apply an even layer of heat paste on the surface of the installed CPU.

Step 2, (Turning the push pin along the direction of arrow is to remove the CPU cooler, on the contrary, is to install). Please note the direction of arrow sign on the male push pin doesn't face inwards before installation. (This instruction is only for Intel box fan)

Step 3, Please the CPU cooler atop the CPU and make sure the push pins aim to the pin hole on the motherboard. Pressing down the push pins diagonally.

Step 4, Please make sure the Male and Female push pin are joined closely. (for detail installation instruction, please refer to the CPU cooler installation section of the user manual)

Step 5, Please check the back of motherboard after installing. If the push pin is inserted properly, the installation is complete.

Step 6, Finally, please attach the power connector of the CPU cooler to the CPU fan header located on the motherboard.


Note:
The CPU cooler may adhere to the CPU as a result of hardening of heat paste. To prevent such an occurrence, it is suggested that either thermal tape rather than heat paste be used for heat dissipation or using extreme care when removing the CPU cooler.

Source: Gigabyte GA-945P-S3 User’s Manual Book.


ZahidOffset's http://keluargarahmadi.blogspot.com
PulsaGram http://www.pulsagram.com/?id=wj9559

Read more »